liquid filter vessel

Asia

All samples (n = 6) were irradiated in a 96 well plate using an LED panel on top for 3 and 6 h before analysis. An identical set of samples were kept in the dark as controls. The temperature was checked and did not go over 37 °C. The intensity of light was also measured and was constant at 19,500.10 lux. (43.33 W in 0.2 m²), about 5 times less than actual solar light intensity on Earth's surface Therefore, these findings are indicative of even greater danger in real life.

2: Clarification mechanism of coagulant

Chemical coagulation is a process in which chemical agents (coagulants) are added to water treatment to make colloidal dispersion system destabilize and agglomerate. In the coagulation process, small suspended particles and colloidal impurities are aggregated into larger solid particles to separate particulate impurities from water, which is called coagulation clarification.

After adding coagulant into water, colloidal particles and other small particles can be polymerized into larger flocs through the comprehensive action of mixing, coagulation and flocculation. The whole process of coagulation and flocculation is called coagulation.

(1) Destabilization and condensation of colloids

Adding electrolyte to water can compress the electric double layer and destabilize the colloid. The main mechanism is that the electric double layer of colloidal particles in water is compressed or neutralized by adding aluminum salt or iron salt coagulant. The coagulant and raw water are mixed rapidly and evenly, and a series of chemical reactions are produced to destabilize. This process takes a short time, generally about 1 min. Some cationic polymers can also play a role in the destabilization and condensation of colloids in water. These polymers have a long chain structure and positive charge in water. Their destabilization and condensation of colloids in water is due to the interaction of van der Waals force adsorption and electrostatic attraction.

(2) Flocculation and formation of floc (alum)

The particle size of the initial flocculate formed by colloid destabilization and coagulation in water is generally more than 1 m. at this time, Brownian motion can no longer push them to collide and form larger particles. In order to make the initial flocs collide with each other to form large flocs, it is necessary to input additional energy into the water to produce a velocity gradient. Sometimes it is necessary to add organic polymer flocculant into water, and the adsorption bridging effect of long chain molecules of flocculant is used to improve the probability of collision and adhesion. Flocculation efficiency usually increases with the increase of flocculate concentration and flocculation time.

Compared with polyaluminum chloride, polyaluminum chloride has the advantages of high density, fast settling speed and wide pH adaptability; the coagulation effect is less affected by temperature than that of polyaluminum sulfate; however, when adding ferric salt, it should be noted that when the equipment is not in normal operation, the iron ions will make the effluent color, and may pollute the subsequent desalination equipment.

For research published in Archives of Toxicology in 2020, scientists fed one group of mice a solution containing titanium dioxide for one month, and compared it to those that did not receive the additive. They found “the richness and evenness of gut microbiota were remarkably decreased and the gut microbial community compositions were significantly changed” in the titanium dioxide group when compared with the control group. The tests also revealed that the titanium dioxide exposure could cause locomotor dysfunction, or mobility issues “by elevating the excitement of enteric neurons, which might spread to the brain via gut-brain communication by vagal pathway.” The researchers concluded: “These findings provide valuable insights into the novel mechanism of TiO2NP-induced neurotoxicity. Understanding the microbiota-gut-brain axis will provide the foundation for potential therapeutic or prevention approaches against TiO2NP-induced gut and brain-related disorders.”

One of the primary advantages of lithopone is its excellent thermal stability. It performs well under high-temperature conditions, which is essential for paints that will be exposed to extreme weather. Lithopone’s resistance to UV radiation helps maintain the brightness and color integrity of paints, making it a preferred choice for outdoor applications. As a result, many suppliers are focusing on providing lithopone that meets the specific needs of manufacturers in the architectural, automotive, and industrial paint sectors.

Titanium dioxide in sunscreen

Food safety experts in the European Union (EU) have recently updated their safety assessment of TiO₂ as a food additive. In Europe, TiO₂ is referred to as E171, in accordance with European labelling requirements for food additives. The EU expert panel took into account toxicity studies of TiO₂ nanoparticles, which to this point had not been considered relevant to the safety assessment of TiO₂ as a food additive.  

② Plastics: At present, it is the second largest user of titanium dioxide pigments, accounting for about 20% of the total demand for titanium dioxide. The amount of titanium dioxide used in plastic products will vary with the use requirements, generally between 0.5% and 5%. According to data from the National Bureau of Statistics, the production of plastic products in China increased from 57.81 million tons in 2012 to 81.84 million tons in 2019, with a compound annual growth rate of 5.1%. The amount of titanium dioxide increases accordingly.

3. Safety measures The MSDS should provide recommendations for safe handling, storage, and disposal of lithopone. This may include guidelines for personal protective equipment, proper ventilation, and spill response procedures.